Solvent 401 is a high performance aromatic hydrocarbon solvent used in paints, coatings, inks, resins, adhesives, and chemical manufacturing. It matters because it delivers strong solvency power, stable evaporation, and consistent performance in demanding industrial processes. Manufacturers, formulators, and bulk buyers choose Solvent 401 when they need reliable dilution, smooth application, and controlled drying without compromising product quality.
Solvent 401 is an aromatic solvent derived from petroleum refining streams. It contains a controlled blend of aromatic hydrocarbons that provide excellent solvency for oils, resins, rubber compounds, and polymer systems. Because of this balance, it performs well in both formulation and processing stages.
At the same time, Solvent 401 offers predictable evaporation and good compatibility with common binders. Therefore, producers rely on it to maintain uniform viscosity and surface finish across batches.
Industries use Aromatic Hydrocarbon Solvent because it solves multiple formulation challenges at once. First, it dissolves heavy and complex materials effectively. Second, it improves flow and leveling during application. Finally, it supports consistent curing and drying behavior.
As a result, manufacturers reduce defects, improve productivity, and maintain stable product performance.
Aromatic Hydrocarbon Solvent delivers a practical balance of physical and chemical properties. These features make it suitable for continuous industrial use.
Core characteristics include:
Strong solvency for resins, oils, and polymers
Moderate and controlled evaporation rate
Clear appearance with low impurity content
Good compatibility with aromatic based systems
Stable performance under normal storage conditions
Because of these properties, formulators integrate Aromatic Hydrocarbon Solvent easily into existing recipes.
Paint and coating manufacturers use Solvent 401 to dissolve alkyd resins, improve viscosity control, and enhance film formation. It supports smooth application while reducing brush marks and surface defects.
In addition, it helps coatings spread evenly on metal, concrete, and wood surfaces.
Ink producers rely on Solvent 401 to adjust flow, improve pigment dispersion, and stabilize print quality. Because it evaporates at a controlled rate, it supports clean printing and sharp image definition.
Therefore, it works well in industrial and packaging ink systems.
Adhesive formulators use Solvent 401 to dissolve rubber based and resin based components efficiently. It improves tack development and ensures consistent bonding strength.
As a result, manufacturers achieve reliable adhesion across different substrates.
In rubber and polymer applications, Solvent 401 assists with compound preparation and viscosity adjustment. It allows better mixing and uniform distribution of additives.
Consequently, processors achieve more consistent mechanical properties.
Chemical producers use Solvent 401 as a carrier or reaction medium where aromatic solvency is required. Its predictable behavior supports repeatable production results.
Choosing Aromatic Hydrocarbon Solvent offers practical advantages across multiple industries.
Key benefits include:
Improved dissolution of complex materials
Stable viscosity control during processing
Better surface finish and appearance
Reduced formulation adjustments
Consistent batch to batch quality
Because of these benefits, Solvent 401 supports cost efficiency and operational reliability.
Compared to general purpose aromatic solvents, Heavy Aromatic Solvent provides tighter quality control and more predictable performance. While lighter solvents may evaporate too fast, Solvent 401 maintains balance.
Therefore, manufacturers prefer it when formulation stability matters more than rapid evaporation.
The following table shows typical technical data. Values may vary slightly by production batch.
| Property | Typical Value |
|---|---|
| Appearance | Clear liquid |
| Chemical Type | Aromatic hydrocarbons |
| Density @ 20°C | 0.86 – 0.88 g/cm³ |
| Distillation Range | Controlled aromatic range |
| Flash Point (Closed Cup) | Approx. 40–45°C |
| Solubility | Insoluble in water |
| Odor | Characteristic aromatic |
These specifications help buyers evaluate suitability for specific formulations.
Solvent 401 production and testing commonly align with recognized international methods such as:
ASTM methods for distillation and flash point
ISO procedures for density and purity testing
EN standards for industrial solvent evaluation
Compliance with these standards ensures consistent quality and safe industrial use.
Producers apply strict quality control during refining, blending, and packaging. Each batch undergoes testing for density, appearance, and distillation behavior.
As a result, buyers receive a solvent that performs consistently in large scale production.
Suppliers offer Solvent 401 in multiple industrial packaging formats to suit different logistics needs.
Common packaging options include:
Steel drums (180–200 kg)
IBC tanks (approximately 1,000 kg)
Bulk tanker supply for large volumes
This flexibility helps buyers optimize storage and transportation costs.
Proper storage ensures long term stability and safety.
Recommended practices include:
Store in tightly sealed containers
Keep away from open flames and heat sources
Use in well ventilated areas
Follow standard industrial solvent handling procedures
By following these steps, users maintain product quality and workplace safety.
Solvent 401 supports international trade due to its stable properties and standard packaging. Exporters typically ship it under regulated hazardous material guidelines.
Documentation such as MSDS, COA, and packing lists accompanies shipments to ensure smooth customs clearance.
Basekim supplies Solvent 401 to international markets with consistent specifications and export ready logistics. Many buyers also work with Basekim to secure long term bulk supply contracts.
When sourcing Aromatic Hydrocarbon Solvent, buyers should focus on more than price.
Key evaluation points include:
Clear technical specifications
Consistent batch quality
Compliance with ASTM or ISO standards
Flexible packaging and shipping options
Reliable communication and documentation
These factors protect production quality and delivery timelines.
Solvent 401 remains a practical choice for manufacturers who need reliable solvency, stable processing, and predictable results. With proper sourcing, specification review, and handling, it supports efficient production across multiple industries.
Manufacturers in paints, coatings, inks, adhesives, rubber processing, and chemical formulation use it to dissolve resins, adjust viscosity, and improve application performance.
It helps control evaporation, which improves flow, leveling, and surface finish. This balance reduces defects such as streaks, pinholes, and uneven coating.
Yes. Its consistent composition and stable behavior make it suitable for continuous manufacturing and high-volume operations.
Suppliers typically offer steel drums, intermediate bulk containers, and tanker shipments to match different logistics and storage needs.
