Bitumen MC30 is a medium-curing cutback bitumen that plays a critical role in road construction and surface dressing applications. In addition, it offers excellent workability and adhesion on granular surfaces. As a result, it is widely preferred in infrastructure projects across various climates. Moreover, as a trusted bitumen MC30 supplier, Basekim ensures consistent quality and timely delivery of this versatile product. Ultimately, our commitment to excellence makes us a reliable partner for contractors and developers worldwide.
To begin with, it is a mixture of penetration grade bitumen and a medium volatile solvent, typically kerosene. As such, it offers a balanced formulation suitable for cold applications. Moreover, the presence of kerosene ensures proper fluidity at ambient temperatures. Therefore, it is commonly uses in road priming and surface treatments. It is designed to be fluid at ambient temperatures for easy application in cold or damp conditions, particularly for prime coat applications on roads.
Medium Curing Cutback
MC-30
MC30 Prime Coat Bitumen
Medium Curing Asphalt
Kerosene-Based Bitumen MC30
Cold Applied Bitumen
HS Code: 27132000
CAS Number: 8052-42-4
Bitumen MC30 is classified under cutback bitumen grades based on viscosity:
Grade: MC30 (Medium Curing, 30 refers to viscosity range)
| Property | Unit | Specification |
|---|---|---|
| Kinematic Viscosity @60°C | cSt | 30 – 60 |
| Flash Point | °C | Minimum 38 |
| Distillation Test | Residue: % wt | Minimum 55 |
| Ductility @25°C | cm | Minimum 100 |
| Penetration @25°C | dmm | 100 – 200 |
| Solubility in Trichloroethylene | % wt | Minimum 99 |
This Product is primarily produced by blending penetration grade bitumen, such as 80/100 or 60/70, with a medium-curing petroleum solvent like kerosene. As a result, the mixture becomes sufficiently fluid for easy handling and application. Consequently, it can be sprayed directly at ambient temperatures without the need for heating. Therefore, Bitumen MC30 is ideal for use in prime coats and other applications where cold application is necessary.
As a leading bitumen MC30 supplier, we provide this product for a wide range of applications:
Prime coating on granular bases
Surface dressing for low-traffic roads
Dust control in dry regions
Cold mix asphalt production
Base preparation for new pavement
Temporary road repairs
Spray Application using distributors
Hand Application for small-scale priming
Mixing with aggregates in cold mix preparation
To meet various project needs, Basekim offers Bitumen MC30 in the following packaging formats:
Firstly, it is available in 160-liter steel drums with a net weight of approximately 180 kg.
In addition, we supply the product in bulk via tankers for large-scale operations.
Upon request, we can also provide IBC totes for flexible mid-size storage.
Lastly, for international bulk transport, flexi-tanks are an ideal and efficient solution.
To ensure product stability, Bitumen MC30 should be stored in cool, well-ventilated areas, away from ignition sources.
Furthermore, it is essential to avoid direct contact with skin during handling.
For safety reasons, personnel must always use appropriate personal protective equipment (PPE).
Equally important, sealed containers must be maintained to prevent the evaporation of volatile solvents.
Due to its solvent content, Bitumen MC30 is considered flammable and must be kept away from open flames or heat sources.
Therefore, it should never be released into the environment under any circumstances.
In the event of a spill, it is recommend to contain and absorb the substance using non-combustible material.
Moreover, waste must be dispose of in accordance with local hazardous waste regulations.
First and foremost, it is easy to apply in cold climates where hot mix asphalt is not feasible.
Additionally, it offers superior penetration into aggregates, improving bond strength.
As a result, Bitumen MC30 helps to reduce dust and strengthen the road base.
From a cost perspective, it is more economical than traditional hot mix bitumen.
Finally, its medium-curing nature allows for a longer working time, providing flexibility during application.
| Grade | Viscosity Range | Cure Time | Application |
|---|---|---|---|
| MC30 | 30–60 cSt | Medium | Prime coat |
| MC70 | 70–140 cSt | Medium | Cold mix & patching |
| RC30 | 30–60 cSt | Rapid | Surface treatment |
| SC250 | 250–500 cSt | Slow | Spray seals |
| Feature | Bitumen MC30 | Bitumen Emulsion |
|---|---|---|
| Curing | Solvent evaporation | Water evaporation |
| Flammability | Flammable | Non-flammable |
| Environmental Impact | Moderate | Lower |
| Application Temp | Ambient | Ambient |
| Usage | Prime coat, patching | Surface dressing |
Bitumen MC30 is most commonly used in:
Rural road development
Developing country infrastructure projects
Temporary construction roads
Driveways and parking lots
Surface primer for asphalt overlays
As a trusted bitumen MC30 supplier based in Dubai and Turkey, Basekim serves clients in:
Africa (Ghana, Nigeria, Kenya)
Middle East (UAE, Saudi Arabia, Oman)
Asia (India, Pakistan, Bangladesh)
South America
Competitive pricing
Consistent product quality
Fast delivery from Dubai ports
Custom packaging solutions
Experienced export documentation team
Compliance with international standards (ASTM D2027)
All our Bitumen MC30 is tested according to ASTM standards, ensuring:
Proper viscosity range
Clean distillation
Residue ductility and solubility
Flash point compliance for safety
Upon request, we can offer:
Modified cutback formulations
Lower or higher viscosity blends
Eco-friendly alternatives
Basekim ensures:
Responsible sourcing of bitumen
Low-VOC product formulation options
Reusable and recyclable packaging
Compliance with ISO 14001: Environmental Management
Whether you are a government contractor, asphalt company, or distributor, Basekim is your reliable bitumen MC30 supplier. Our extensive supply network and export expertise ensure seamless delivery and customer satisfaction
A: 24 metric tons (1 container of 200-liter drums)
A: Up to 6 months in sealed drums under ideal conditions
A: Yes, in ISO tankers or flexitanks.
The TDS for Bitumen MC30 includes detailed technical specifications, performance data, and application instructions to help you use the product effectively and efficiently.
The MSDS for Bitumen MC30 provides essential safety information, including handling guidelines, potential hazards, storage recommendations, and emergency measures to ensure safe and proper use.